Sale

Motor Controller 1230-2402

SKU: WP12360C Model: 1230-2402

Web Price: $311.17

Save up to 9%

Usually ships in 1 business day

Easy In-Store and Online Returns
Read our Return Policy

Description

Technical Specifications

  • Model: 1230-2402
  • Operating voltage range: 16 to 32 V
  • Nominal input voltage: 24 V
  • 2 Minute Current Rating (amps): 200
  • 1 Hour Current Rating (amps): 80
  • MOSFET over-temperature cutback: linear cutback starts at 212° F; complete cutoff at 230° F
  • MOSFET under-temperature cutback: approx. 50% motor current at -13° F; complete cutoff at -40° F
  • Throttle Type: 0-5K Ω (default setting), flexible throttle circuitry accommodates a variety of throttle types: 5kΩ–0, 0–5kΩ, 0–5V, etc.
  • Operating Ambient Temperature Range: -40° F to 122° F
  • Package environmental rating: IP53
  • Dimensions: 6.45 (L) x 5.74 (W) x 2.20 (H) in.
  • Net Weight: 2.4 lb
  • Regulatory compliance:
  • EMC emissions: EN50081-2/08.93
  • EMC immunity: EN50082-2: 1995
  • Safety, uncontrolled runaway: EN1175

It is necessary that the Curtis AC Controller is programmed before applying to a specific application. For a customer without AC Motor Controller Programming knowledge or experience, please consult your motor dealer and carefully read the Curtis 1230 AC Motor Controller Data-sheet before making your purchase.

Our knowledgeable technicians possess OEM programs (controller settings) of certain utility vehicles and forklifts. Customers may contact us and send us the vehicle or forklift information (manufacturer, model and year of production), to see see if we can provide the controller with its OEM program.

This 1230-2402 can also be programmed by Curtis 1313-4331 Handheld Programmer or Curtis 1314 PC Programming Station.

By default, we will deliver the controller with default setting of 24V / 200A / 0-5kΩ. For better applying the controller to your system, please confirm with us the required throttle type (0-5kΩ, 5k-0Ω or 0 – 5V).

Product Overview

The Curtis 1230 motor controller is an AC induction motor speed controller designed for use in a variety of material handling vehicles. Typical applications includes pallet trucks, low lifts, stackers, warehouse sweeper and scrubber machines, and other small industrial vehicles. This high performance programmable controller is simple to install, efficient, and cost effective.

The 1230 controller offers smooth precise control of motor speed and torque. When used with hydraulic systems, the 1230 turns the pump motor on and off and also controls valves on the hydraulic line—thus controlling the hydraulic path for Lift and Lower operations. These controllers are fully programmable through the Curtis Model 1313-4331 Handheld Programmer or 1314 PC Programming Station. The programmer provides diagnostic and test capability in addition to configuration flexibility. The 1230 is also designed to work with the optional Curtis 840 Spyglass data display and the optional Curtis 1312 tiller multiplexer.

Key Features

  • 60–200 amp AC induction motor controller
  • MultiModeâ„¢ feature allows two distinct user-selectable operation modes
  • Easily programmable through the Curtis Model 1313-4331 Handheld Programmer or 1314 PC Programming Station
  • Complete diagnostics through the programming devices and through the controller’s built-in Status LED
  • Throttle input for single-ended or wigwag 5kΩ pots or 0–5V throttles (both standard full stroke and restricted range)
  • Active pre-charge of controller capacitor bank extends life of main contactor tips
  • Two hour meters – total KSI-on hours and drive hours – and their associated maintenance timers are built into the controller, with EEPROM storage (no battery)
  • BDI calculations performed within controller
  • Meets EEC fault detection requirements
  • Fault detection circuitry on throttle inputs can be used to inhibit operation if throttle signal goes out of range for any reason (applies both to the traction throttle and, in applications that include a proportional valve, to the hydraulic throttle as well)
  • Stall protection
  • Internal reverse polarity protection (no external diode required)
  • Continuous diagnostics during operation, with microprocessor power-on self-test
  • All output drivers are short-circuit protected and provide built-in coil spike protection
  • Positive battery connections for all inputs
  • Fully protected inputs
  • Internal and external watchdog circuits ensure proper software operation
  • High environmental protection rating (IP53)
  • 3-wire serial interface for multifunction display

This is a replacement controller with the same function, structure and dimensions as the original part from the OEM.

Please contact us for compatibility. Our forklift technicians can help you find the right part for your needs.

Package Contents: (1) replacement controller. Based on order quantity and specifications.

Additional information

Weight 2.80 lbs
Dimensions 8 × 8 × 6 in

Questions and answers of customers

Send me a notification for each new answer.

Reviews

There are no reviews yet

Be the first to review “Motor Controller 1230-2402”
feedback_mix.png
FREE Shipping on all orders over $25. Today Only. see restrictions
This is default text for notification bar
0