Motor Controller 1204M-5301

Description

Specifications

• Model: 1204M-5301
• Nominal Battery Voltage (Volts): 48V (default setting) or 36V
• 2 Minute Current Rating (amps): 325
• 5 Second Boost Current Rating (amps): 358
• 1 Hour Current Rating (amps): 140
• Plug Braking (A2 Busbar): Yes
• PWM operating frequency: 15.6 kHz
• Electrical isolation to heatsink (min.): 500 VAC
• KSI input current (no contactors engaged):
• 70 mA without programmer
• 130 mA with programmer
• Logic input current: < 2 mA
• Status LED output current (max.): < 2 mA
• Ten throttle types can be used with these controllers:
• Type 0: 2-wire potentiometer, 0–5kΩ
• Type 1: 2-wire potentiometer, 5kΩ–0
• Type 2: single-ended 0–5V input
• Type 3: 2-wire potentiometer, 4.6kΩ–0
• Type 4: 2-wire potentiometer, 5.5kΩ–0
• Type 5: 2-wire potentiometer, 1kΩ–0
• Type 6: ITS input
• Type 7: single-ended 6.3–10.6 V input
• Type 8: single-ended 6–12 V input
• Type 9: single-ended 3-wire potentiometer, 0–5kΩ

Operating ambient temperature range: -104° F to 122° F

Storage ambient temperature range: -104° F to 185° F

Package environmental rating: ISTA 2A; electronics sealed to IP65

Regulatory compliance: EN 12895 and EN 61000

Dimensions: 6.81 (L) x 5.74 (W) x 3.03 (H) in.

Net Weight: 5.07 lbs

Features:

• High-frequency switching and ultra-low voltage drops provide high efficiency and silent operation.
• Simple mounting and wiring with push-on connectors for control signals and plated solid copper buses for power connections.
• Compatible with either a two-wire potentiometer or a voltage throttle.
• Throttle fault protection circuitry disables controller if throttle wires become open.
• High pedal disable feature prevents controller operation if key is turned on while throttle is applied.
• Plug braking diode internal to controller.
• Thermal protection and compensation circuit provides constant current limit over operating range and during under/over temperature cutback; no sudden loss of power under any thermal conditions.
• Undervoltage cutback function protects against low battery voltage, including low voltage caused by external loads.
• Easily programmable through the CURTIS Model 1313-4331 Handheld Programmer or 1314 PC Programming Station.
• Rugged anodized aluminum extruded housing meets IP65 environmental sealing standards for use in harsh environments

This is a replacement part with the same function, structure and dimensions as the original part from the manufacturer.

Please contact us for compatibility. Our forklift technicians can help you find the right part for your needs.

Package Contents: (1) replacement part. Based on order quantity and specifications.